MAKINO Mfg. Co., Ltd.

Separation technologies

Micro sifter
	In-line type air classifier Classified particles accurately with the screen MS sieve powders containing moisture or oils or electrostatic material ※Depending on the installation method,additional equipment may be repuired. Micro sifter(Japanese page)

Circular vibrator
	Screening for general powders Simple vibration mechanism Compact & easy maintenance ※Depending on the installation method,additional equipment may be repuired. Circular vibrator(Japanese page)

Clean sifter
	Continuous removal for waste thread from grain & feed Continuous removal for lump & foreign substances Mass processing with low noise and small vibration ※Depending on the installation method,additional equipment may be repuired. Clean shifter(Japanese page)

---

Pelletron DeDuster(C-20)
	The C-20 DeDusterR is designed for a product throughput of 5 - 100 lb (2 - 45 kg/h) and requires only 10.5 in (266 mm) installation height. Compressed plant or instrument air will be used for cleaning. ※Depending on the installation method,additional equipment may be repuired. Pelletron DeDuster(C-20)(Japanese page)

---

Pelletron DeDuster(type-P)
	It separates dust from plastic pellets It removes fine miraculously with the structure of the patent The damage of material is very small. ※Depending on the installation method,additional equipment may be repuired. Pelletron DeDuster(type-P)(Japanese page)

---

Pelletron DeDuster(type-XP)
	It separates dust from plastic pellets It removes fine miraculously with the structure of the patent Height is low, and it is possible to install to the line easily. ※Depending on the installation method,additional equipment may be repuired. Pelletron DeDuster(type-XP)(Japanese page)

---

Pelletron DeDuster(type-RC)

The RC 1 DeDusterR is designed for a product throughput of 10 - 750 lb/h (20 - 350 kg/h) and requires only 12 in (305 mm) installation height. The cleaning air will be supplied through a fan with variable speed control. The dusty air will be cleaned in a compact filter/cyclone combination and returned to the DeDusterR in a closed loop system. ※Depending on the installation method,additional equipment may be repuired. Pelletron DeDuster(type-RC)(Japanese page)

---

Tettori-Bayai
	Unique magnet For removal iron dust and iron dust from products on gravity line. Easy connection in exist duct The Magnet is easy separation from the Main body ※Depending on the installation method,additional equipment may be repuired. Tettori-Bayai(Japanese page)

---

Magnet drum separator
	It separates iron contiguously It is possible to use from small size to silo size. ※Depending on the installation method,additional equipment may be repuired. Magnet drum separator(Japanese page)

---

Bag filter
	It collects powder dust separatly from each machine. For collection of the pneumatic transportation Automatic shaking off type and simple type ※Depending on the installation method,additional equipment may be repuired.

---

Magnet rotor
	It uses for fluid bad powder. Magnet bar rotates. It is possible to remove stiction of the iron with one touch operation. ※Depending on the installation method,additional equipment may be repuired. Magnet rotor(Japanese page)

---

Magnet bar
	Lattice magnet Magnet bar rotates. It is possible to remove stiction of the iron with one touch operation. ※Depending on the installation method,additional equipment may be repuired. Magnet bar(Japanese page)